Memory expansion, Memory expansion -10, Removing a multimediacard – Toshiba Satellite U200 User Manual
Page 156
8-10
User’s Manual
Optional Devices
Removing a MultiMediaCard
To remove a MultiMediaCard, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to MultiMediaCard and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.
Removing a MultiMediaCard
Memory expansion
You can install additional memory in the computer’s memory module slot to
increase the amount of RAM.
The maximum amount of memory modules varies by following models:
■
Intel
®
945GM model: 4,096 MB
■
Intel
®
940GML model: 2,048 MB
This section describes how to install and remove a memory module.
MultiMediaCard
Bridge media slot
■
Make sure the Bridge media slot indicator is out before you remove
the MultiMediaCard or turn off the computer’s power. If you remove the
MultiMediaCard or turn off the power while the computer is accessing
the MultiMediaCard you may lose data or damage the card.
■
Do not remove a MultiMediaCard while the computer is in Standby or
Hibernation mode. The computer could become unstable or data in the
MultiMediaCard could be lost.
■
Place a mat beneath the computer to prevent scratching or damaging
the computer’s lid when installing/replacing the memory module. Avoid
mats made of materials that generate static electricity.
■
When you install or remove a memory module, ensure that you do not
touch any other internal areas of the computer.