Toshiba Satellite P755 - Manual (Page 93)

User’s Manual 3-31
Satellite P750/P755 Series
USB Device
A device corresponding to USB 3.0 standards can be connected to the
USB 3.0 port on the computer.
A device corresponding to USB 2.0 standards can be connected to the
USB 3.0 or USB 2.0 port on the computer.
Connecting the USB device
To connect an USB device, follow the steps as detailed below:
1. Connect an USB connector to the USB port.
Disconnecting an USB device
When you have finished using an USB device, you can follow the
procedures below in order to disconnect it:
1. Wait for the indicator light of an USB device to go out to make sure all
activity has stopped.
2. Click the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.
3. Click an USB device that you want to remove.
4. Carefully pull an USB device’s USB connector out from within the
computer’s USB port.
Make sure the connector is properly aligned with the socket.
Do not try to force the connection, doing so can damage the
connecting pins.
■
A connected USB device may not be recognized if it is connected to
the computer’s USB port while the computer is in Sleep Mode or
Hibernation Mode. If this occurs, disconnect the USB device and then
reconnect the device while the computer is turned on.
■
If you connect an USB device after the computer has already been
turned on, it will take about ten seconds for it to be recognized by the
computer.
Do not attempt to disconnect and reconnect the drive before this period
has elapsed.
If you disconnect an USB device or turn off the power while the computer
is accessing the drive you may lose data or damage an USB device or the
drive.