Toshiba Satellite P755 - Manual (Page 112)

User’s Manual 4-17
Satellite P750/P755 Series
How to remove disc when the disc tray will not open
For tray ODD models, pressing the eject button will not open the disc tray
when the computer power is off. If the power is off, you can open the disc
tray by inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole near the eject button.
Figure 4-7 Manual release with the eject hole
Writing Disc on Optical Disc drive
You can use the BD-Writer drives to write data to either CD-R, CD-RW,
DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM,
DVD-R DL or BD-R/BD-RE discs.
You can use the DVD SuperMulti drive or BD-Combo drives to write data to
either CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL,
DVD+RW, DVD-RAM or DVD-R DL discs.
TOSHIBA Disc Creator and Corel Digital Studio are provided as writing
software with this computer.
Corel Digital Studio can be used to write files in video format. TOSHIBA
Disc Creator can be used to write data.
1. Eject hole
1
Φ 1.0 mm
Turn off the power before you use the eject hole. If the disc is spinning
when you open the disc tray, the disc could fly off the spindle and cause
injury.
The optical drive installed on this computer cannot write multiple sessions
on DVD-R DL disc sessions. Once a disc has been written to once, it will
be finalized. Once finalized, no further writing to the disc will be possible
regardless of what portion of the total disc capacity was used.