beautypg.com

Turning off the power – Toshiba Satellite P755 User Manual

Page 28

background image

User’s Manual

1-8

Satellite P750/P755 Series

Turning off the power

The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Sleep Mode.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and
the computer will boot to the operating system’s main screen the next time
it is turned on.

1. If you have entered data, either save it to the hard disk drive or to other

storage media.

2. Make sure all disk/disc activity has stopped before removing the disc or

floppy diskette.

3. Click Start.

4. Click the Shut down button (

).

5. Turn off any peripheral devices connected to your computer.

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the computer into Sleep Mode. In this
mode data is maintained in the computer’s main memory so that when you
turn on the power again, you can continue working right where you left off.

Make sure the Hard Disk Drive/Optical Disc Drive indicator is off. If
you turn off the power while a disk (disc) is being accessed, you may
lose data or damage the disk.

Never turn off the power while an application is running. Doing so could
cause loss of data.

Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause data
loss.

Do not turn the computer or peripheral devices back on immediately - wait
a short period to avoid any potential damage.

When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always completely
shut down the computer. This includes turning off any wireless
communication functionalities and canceling settings that reactivate the
computer automatically, such as a timer recording function. Failure to
completely shut down the computer in this way could allow the operating
system to reactivate and run pre-programmed tasks or preserve unsaved
data, which could interfere with aviation or other systems, possibly causing
serious injury.

This manual is related to the following products: