Brother 1030e - Manual (Page 72)

66 Chapter 11
Programming a Fax Forwarding Number
1
Press Menu/Set, 8, 6.
2
Press or until the screen displays FAX FORWARD, and press Menu/Set.
The screen prompts you to enter the number of the fax machine where faxes will be forwarded.
3
Enter the forwarding number (up to 20 digits), and press Menu/Set.
4
Press Stop/Exit.
You can change a Fax Forwarding number remotely.
Recording the Paging Outgoing Message (OGM)
Before paging can work, you should first record the Paging OGM.
1
Press Menu/Set, 8, 3. The screen prompts you to choose an OGM.
2
Press or to reach PAGING MSG., and press Menu/Set.
3
Press or to select RECORD MSG, and press Menu/Set.
4
Pick up the handset to record a message.
5
Press Stop/Exit and replace the handset. The Message Manager plays your OGM.
6
Press Stop/Exit.
Programming the Paging Number
1
Press Menu/Set, 8, 6.
2
Press or until the screen displays PAGING, and press Menu/Set.
The screen prompts you to enter your pager number.
3
Enter your paging number up to 20 digits and press Menu/Set.
This is the telephone number which your machine must call.
4
Press Stop/Exit.
You can delete or play the Paging message in the same way as the TAD Message.
(See Recording the Message Manager’s Outgoing Message (TAD MESSAGE),
page 61.)
You cannot change a Paging number remotely.