Brother 1030e - Manual (Page 18)

12
FAX-1030e Control Panel Overview
6 8 9 10 11 13 14 15
16
12 7
2
3
4
5
1
17
20
18
21
19
1 DIGITAL TAD
Lets you activate Message Manager.
Also, notifies you that you have voice or
fax messages in the memory.
2 Shift
This key is used to access the “7” through
“12” One Touch numbers.
3 Redial/Pause
Redials the last number called. Also
inserts a pause in autodial numbers.
4 One Touch Dial Keys
These 6 keys give you access to 12
previously stored phone numbers.
5 MIC (Microphone)
Picks up your voice when you speak to
another party using Speaker Phone.
6 Enlarge/Reduce
Use this key to enlarge or reduce copies
depending on the ratio you select: 150%,
125%, 120%, 100%, 93%, 87%, 75% or
50%.
To reduce the image size automatically to
fit on to A4 paper, select AUTO.
7 Sort
Use this key when you want multiple
copies of a multiple page original in order.
8 Copy
Makes a copy.
9 Speaker phone
Lets you speak to the person at the other
end and dial telephone and fax numbers
without lifting the handset.
0 Dial Pad
Dials phone and fax numbers and can be
used as a keyboard for entering
information into the machine.
# key lets you switch the dialling type
during a telephone call from “PULSE” to
“TONE”. # key also lets you skip to the
next message when you are playing voice
messages and
key lets you repeat the
last message when you are playing voice
messages.
A R
Use this key to gain access to an outside
line and/or to recall the operator or
transfer a call to another extension when it
is connected to a PABX.
B Search/Mute
Lets you dial stored phone numbers by
pressing # and a two-digit number. Also
lets you look up numbers stored in the
dialling memory. Also, lets you put calls
on hold.
C Receive Mode
Use to select how the fax machine will
handle incoming calls.