Brother 1030e - Manual (Page 105)

99
Accessory List
*For optimum print quality and product performance within published specifications, use
only the correct Brother replacement ribbon. The use of other ribbons may invalidate your
warranty.
Model Name Description
PC-201 Printing Cartridge (1 set per box)
PC-202RF 2 re-fills for use in PC-201 Printing Cartridge
PC-204RF 4 re-fills for use in PC-201 Printing Cartridge
Change Answer Mode
Press 9 8.
then for TAD
, press 1.
Fax/Telephone (F/T) , press 2.
Fax , press 3.
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1 Press Menu/Set, 8, 3.
2 Enter a three- digit code using number keys 0-9, and #.
The cannnot be changed.
3 Press Menu/Set.
4 Press Stop/Exit.
Using Remote Access Code
1 Dial your machine phone number from a touch tone
phone.
2 Enter your Remote Control Access Code (159 ) after
the beep.
3 Your machine signals the kinds of messages received:
1 long beeps – Fax message(s)
No beeps – no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset your machine when you finish.
6 Hang up.
R
EMOTE
C
ONTROL
A
CCESS
C
ARD
Retrieve a Fax
Press 9 6.
then to
Print a Memory Status List press
1, then enter the number of remote
fax machine, and then # #. After
the beep, hang up and wait.
Retrieve all faxes press 2, then
enter the number of remote fax
machine, and then # #. After the
beep, hang up and wait.
Erase all fax messages press 3.
Check Receiving Status
Press 9 7.
then for
Fax message, press 1.
Voice message , press 2.
1 long beeps – received messages
3 short beeps – no messages
Change Answer Mode
Press 9 8.
then for
Message Centre, press 1.
Fax/Telephone (F/T) , press 2.
Fax Only , press 3.
Exit Remote Operation
Press 9 0.
Using Remote Access Code
1 Dial your fax machine phone number from a
touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 The fax machine signals the kinds of
messages received:
1 long beep – Fax message(s)
2 long beeps – Voice message(s)
3 long beeps – Fax and Voice message(s)
No beeps – no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset the machine when you
finish.
6 Hang up.
M ESSAGE M ANAGER
R EMOTE C ONTROL A CCESS C ARD
(For FAX-1020e)
(For FAX-1030e)
1
1 4
5 6