Brother 1030e - Manual (Page 25)

Setup 19
B
ASIC USE
Storing Speed Dial Numbers
You can store Speed Dial numbers, which you dial by pressing only four keys. There are 100 Speed
Dial locations. Even if you lose electrical power, numbers stored in memory will not be lost.
1
Press Menu/Set , 6 , 2 .
The screen prompts you to enter a location.
2
Use the dial pad to enter a two-digit location (00–99).
3
Press Menu/Set . The screen displays your entry, then
prompts you to enter the number you are storing.
4
Enter the number (up to 20 digits).
5
Press Menu/Set . The screen now prompts you to store
a name with this number.
6
Use the dial pad to enter the name (up to 15 characters). You can use the chart of Entering Text ,
page 91 to help you enter letters— OR —Press Menu/Set and go to Step 8 to store the number
without a name.
7
Press Menu/Set .
8
The screen prompts you to select the type of number this is. Use or to select the type
you want.
9
Press Menu/Set .
10
Return to Step 2 to store another Speed Dial number—OR—Press Stop/Exit.
Changing One Touch and Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a
location where a number is already stored, the screen
displays the current name stored there, then prompts you to
either change it or exit.
1
Press 1 to change the number stored, or press 2 to exit without making a change.
2
Enter a new number.
◆ If you want to erase the number, press Stop/Exit when the cursor is to the far left of the
digits.
◆ If you want to change a digit, use
or to position the cursor under the digit you want
to change, then enter it.
3
Follow the directions in Storing One Touch Dial or Speed Dial Numbers.
FAX a fax number
TEL a telephone (voice) number
F/T both a fax and telephone (voice) number
SPEED-DIAL? #
#05:
ENTER & SET
NAME:
1.CHANGE 2.QUIT