Specifications – Pioneer DJM-T1 User Manual

Page 32

Specifications

General

Power requirements ....................................................... AC 220 V to 240 V, 50 Hz/60 Hz
Power consumption ...................................................................................................25 W
Power consumption (standby) .................................................................................0.4 W
Main unit weight ...................................................................................................... 6.1 kg
Max. external dimensions ........................... 265 mm (W) x 107.9 mm (H) x 403 mm (D)
Tolerable operating temperature ........................................................... +5 °C to +35 °C
Tolerable operating humidity ..........................................5 % to 85 % (no condensation)

Audio Section

Sampling rate .......................................................................................................... 48 kHz
A/D, D/A converter .................................................................................................. 24 bits
Frequency characteristic

CD ........................................................................................................20 Hz to 20 kHz

S/N ratio (rated output)

PHONO................................................................................................................92 dB
CD ......................................................................................................................106 dB
MIC ......................................................................................................................84 dB

Total harmonic distortion (CD — MASTER1)...................................................... 0.004 %
Standard input level / Input impedance

PHONO.................................................................................................–52 dBu/47 kW
CD .........................................................................................................–12 dBu/47 kW
MIC .......................................................................................................–52 dBu/47 kW
AUX ......................................................................................................–12 dBu/29 kW

Standard output level / Load impedance / Output impedance

MASTER1 ......................................................................+6 dBu/10 kW/10 W or lower
MASTER2 .................................................................................. +2 dBu/10 kW/330 W
BOOTH ..........................................................................+6 dBu/10 kW/10 W or lower
PHONES .......................................................................+5.4 dBu/32 W/10 W or lower

Rated output level / Load impedance

MASTER1 ........................................................................................... +24 dBu/10 kW
MASTER2 ........................................................................................... +20 dBu/10 kW

Crosstalk (CD) ...........................................................................................................86 dB
Channel equalizer characteristic

HI ...............................................................................................–∞ to +6 dB (13 kHz)
MID ..............................................................................................–∞ to +6 dB (1 kHz)
LOW ............................................................................................–∞ to +6 dB (70 Hz)

Microphone equalizer characteristic

HI ...................................................................................... –12 dB to +12 dB (10 kHz)
LOW ................................................................................. –12 dB to +12 dB (100 Hz)

Input / Output terminals

PHONO input terminal

RCA pin jack ........................................................................................................2 sets

CD input terminal

RCA pin jack ........................................................................................................2 sets

MIC input terminal

XLR connector/phone jack (Ø 6.3 mm) .............................................................. 1 set

AUX input terminal

RCA pin jacks ....................................................................................................... 1 set

MASTER output terminal

XLR connector...................................................................................................... 1 set
RCA pin jacks ....................................................................................................... 1 set

BOOTH output terminal

TRS phone jack (Ø 6.3 mm) ................................................................................. 1 set

PHONES output terminal

Stereo phone jack (Ø 6.3 mm) ............................................................................ 1 set

USB terminal

B type .................................................................................................................... 1 set

! The specifications and design of this product are subject to change without

notice.

! The software screens used in these operating instructions are from the develop-

ment stage and may differ from the actual screens.

! If you wish to purchase new CONTROL CDs or CONTROL VINYLs when they are

expended or damaged, etc., please contact TRAKTOR SCRATCH retailers or
order them from online shops such as that of Native Instruments (http://www.
native-instruments.com/).

Note that these parts are expendables and not covered by the warranty, even
within the warranty period.

! Be sure to use the [MASTER1] terminals only for a balanced output. Connection

with an unbalanced input (such as RCA) using an XLR to RCA converter cable
(or converter adapter), etc., may lower the sound quality and/or result in noise.

For connection with an unbalanced input (such as RCA), use the [MASTER2]
terminals.