Pioneer DJM-T1 - Manual (Page 17)

17 En
English
Mixer section
CUE
USB CD
PHONO
USB CD
PHONO
HEADPHONES
MASTER 1
9
5
3
1
0
- 1
- 3
- 6
- 9
- 15
dB
9
5
3
1
0
- 1
- 3
- 6
- 9
- 15
dB
2
DE
OVER
- 24
OVER
- 24
TAP
CUE
TAP
SHIFT
LOCK
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
CH 1 CH 2
FEELING ADJ.
DJM -T1
2 CHANNEL TRAKTOR MIXER
D
AU
SAMPLE
LEVEL
CRO
CROSS F.
REVERSE
SAMP
PLAY MO
1
2
3
TRIM
9
HI
6
MID
6
LOW
6
TRIM
9
HI
6
MID
6
LOW
6
LEVEL
0
MIXING
MASTER CUE
BOOTH MONITOR
MASTER
0
0
CROSS F. REVERSE
CROSS F. CURVE
THRU
ON OFF
1
2
3
4
6
7
8
5
3
4
6
7
d
5
f
g
b
c
9 9
a
e
1 MASTER LEVEL control
Adjusts the audio level output from the [MASTER1] and [MASTER2] terminals.
2 BOOTH MONITOR control
Adjusts the level of audio signals output from the [BOOTH] terminal.
3 CD, PHONO, USB input selector switch
Select the input source of each channel from the components connected to this
unit.
— [CD]: Selects the DJ player connected to the [CD] terminals.
— [PHONO]: Selects the analog player connected to the [PHONO] terminals.
— [USB]: Selects the sound of the computer connected to the [USB] port.
4 TRIM control
Adjusts the level of audio signals input in each channel.
5 EQ (HI, MID, LOW) controls
These adjust the sound quality of the respective channels.
These adjust the [HI] (high range), [MID] (middle range) and [LOW] (low range),
respectively.
6 CUE (TAP) button
! Press:
Press the [CUE (TAP)] button for the channel you want to monitor.
! [SHIFT] + press:
The BPM value shown on the TRAKTOR tempo display can be set by pressing
four times in beat with the track’s tempo.
7 Channel fader
Adjusts the level of audio signals output in each channel.
8 Crossfader
The sound of the respective channels is output according to the curve character-
istics selected with the [CROSS F. CURVE (THRU,
, )] selector switch.
9 Channel Level Indicator
Displays the sound level of the respective channels before passing through the
channel faders.
a Master Level Indicator
Displays the audio level output from the [MASTER1] and [MASTER2] terminals.
b HEADPHONES MIXING control
Adjusts the monitor volume balance between the sound of the channel whose
[CUE (TAP)] button is pressed and the [MASTER] channel sound.
c HEADPHONES LEVEL control
Adjusts the audio level output from the [PHONES] terminal.
d FEELING ADJ. adjustment hole
This can be used to adjust the crossfader’s operating load.
e CROSS F. REVERSE indicator
Lights when the [CROSS F. REVERSE] switch is on.
f CROSS F. CURVE (THRU, , ) selector switch
This switches the crossfader curve characteristics.
g CROSS F. REVERSE switch
Turns the crossfader reverse function on and off.
Do not pull on the channel fader and crossfader knobs with excessive force. The
knobs are not designed to be removed. Pulling the knobs strongly may result in
damaging the unit.
Outputting sound
Set the volume of the power amplifiers connected to the [MASTER1] and
[MASTER2] terminals to a suitable level. Note that loud sound will be produced if
the volume is set too high.
1 Switch the [CD, PHONO, USB] input selector switch.
Select the input source of each channel from the components connected to this
unit.
2 Turn the [TRIM] control.
Adjusts the level of audio signals input in each channel.
3 Move the channel fader away from you.
Adjusts the level of audio signals output in each channel.
4 Set the crossfader.
Switch the channel whose sound is output from the speakers.
— Left edge: The [CH 1] sound is output.
— Center position: The sound of [CH 1] and [CH 2] is mixed and output.
— Right edge: The [CH 2] sound is output.
! This operation is not necessary when the [CROSS F. CURVE (THRU, , )]
selector switch is set to [THRU].
5 Turn the [MASTER LEVEL] control.
Audio signals are output from the [MASTER1] and [MASTER2] terminals.
Adjusting the sound quality
Turn the [EQ (HI, MID, LOW)] controls for the respective
channels.
Refer to Specifications on page 32 for the range of sound that can be adjusted by
each control.