Itch software screen, Operation – Pioneer DDJ-S1 User Manual
Page 14
14
En
Operation
ITCH software screen
Screen when this unit is connected (Windows)
n
l
b
c
a
a
s
d
1 2
9
8
5
6
7
e
h
i
g
k
j
b
o
p
3
4
m
f
r
q
1
Current time display
2
Simple display of CPU usage rate
3
Virtual deck display switches
The positions of the virtual deck and waveform display can be
changed.
4
Appearance switches
These switch between a screen with a dark coloring and one with a
bright coloring. This is convenient for switching the setting accord-
ing to the brightness of the surroundings in which you are using this
unit.
5
Virtual deck
Displays the track’s playing position and playing speed.
3
1
2
1
Displays the track’s length. The position being played is displayed
with a gray gauge.
2
Turns white when a track is loaded. (When a color label is set,
this changes to the set color.)
3
Turns according to the platter speed. When a point at which a
hot cue is set approaches, this shifts in steps to the color of that
hot cue to notify that the hot cue is approaching. When moving
away from the hot cue, the color shifts back to the original color
in steps.
! The needle flashes when the point 20 seconds before the end
of the track is reached to notify that the end of the track is
approaching.
6
Tempo match display
This indicates the tempo of the tracks on decks (A) and (B) by mea-
sure, and is designed to help you match the tempo.
The red waveform indicates the tempo of the track in deck A (1), the
orange waveform the tempo of the track in deck B (2). When the tem-
pos of the tracks in the two decks match, the positions of the peaks
of the red and orange waveforms match.
! Even if the beat is not synchronized, the positions of the peaks of
the waveforms on the display match when the tempos of the left
and right tracks match.
7
Beat match display
This view shows the position of beats within the track. When the
peaks shown in this window are aligned, the two tracks’ beats are
matched.
The beat match display indicates the beat positions of the tracks
currently playing on decks (A) and (B) and is designed to help you
match the beat. When the beats of the tracks on decks (A) and (B)
match, the positions of the peaks of the waveforms at the top and
bottom match.
8
(TOOL TIPS)
Switches tooltips on/off
9
SETUP
Displays the setup screen.
= Changing the settings (p.30)