Pioneer AVIC-S2 RU - Manual (Page 38)

AC Adapter
z
Do not use the adapter in a high moisture environment. Never touch the adapter when your
hands or feet are wet.
z
Allow adequate ventilation around the adapter when using it to operate the device or charge
the battery. Do not cover the AC adapter with paper or other objects that will reduce cooling.
Do not use the AC adapter while it is inside a carrying case.
z
Connect the adapter to a proper power source. The voltage requirements are found on the
product case and/or packaging.
z
Do not use the adapter if the cord becomes damaged.
z Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it
is damaged or exposed to excess moisture.
Battery
z
Do not attempt to remove or replace the internal Lithium Ion Battery yourself.
z
Use a specified charger approved by the manufacturer.
z
CAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery
can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do
not disassemble, crush, puncture, or dispose of in fire or water.
z
Important instructions (for service personnel only)
9 Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
9 Replace only with the same or equivalent type recommended by the manufacturer.
9 The battery must be recycled or disposed of properly.
9 Use the battery only in the specified equipment.
Addendum to the Software and Database End User License
Agreement
The addendum is not valid without the Software and Database End User License Agreement.
The software is equipped with a fixed speed camera warning service (hereinafter referred to as
speedcam) function.
Pioneer provides the speedcam function as a third party service which User accepts.
By activation of the speedcam function the User also accepts this addendum of the Software and
Database End User License Agreement.
By activation of the function the User also states that he is aware and accepts the terms and
conditions of the third party available on third party’s website which URL to be found on software
operation manual supplied separately.
The speedcam function is aimed to provide User the information about the fixed speed camera
positions.
The service can be updated to provide User the information about mobile speed cameras, which
service is not covered by current agreement but by a separate agreement concluded by and
between the User and the third party (service provider).
The User undertakes all responsibility for adhering the relevant regulation regardless of the
message of the speedcam function.
The speedcam function is provided “as is”. Pioneer makes no warranty regarding the use,
applicability, correctness, up-to-date state or effectiveness of the data or the service provided by
the speedcam function.
6 English