Pioneer HTP-710 - Manual (Page 45)

Controls and displays 03
45
En
English
Deutsch
Italiano
Español
Français
Nederlands
Display
1 PHASE
Lights when the Phase Control is switched on
(page 66).
2 AUTO
Lights when the Auto Surround feature is
switched on (see Auto playback on page 63).
3 RDS
Lights when an RDS broadcast is received
(page 62).
4 ST
Lights when a stereo FM broadcast is being
received in auto stereo mode.
5 TUNE
Lights when a normal broadcast channel is
being received.
6 MHz
Lights when the character display is showing
the currently received broadcast frequency.
7 Sleep timer indicator
Lights when the system is in sleep mode
(page 49).
8 Tuner preset indicators
PRESET
Shows when a preset radio station is
registered or called.
MEM
Blinks when a radio station is registered.
9 PRESET Information or Input signal
indicator
Shows the preset number of the tuner or the
input signal type, etc.
10 Character display
Displays various system information.
11 DTS indicators
DTS
Lights when a source with DTS encoded
audio signals is detected.
HD
Lights when a source with DTS-EXPRESS
or DTS-HD encoded audio signals is
detected.
ES
Lights when a source with DTS-ES
encoded audio signals is detected.
96/24
Lights when a source with DTS 96/24
encoded audio signals is detected.
NEO:6
When one of the NEO:6 modes of the
system is on, this lights to indicate NEO:6
processing (page 63).
1 2 3 4 5 7 6
10
9
11 12 13 14 15 14 16
8
HTP-710_VYXCN_En.book 45 ページ ２０１０年８月２３日 月曜日 午後６時４７分