Speaker setup (htp-sb510), Safety precautions when setting up, Home theater sound setup – Pioneer HTP-710 User Manual
Page 28: Speaker, Preparing the speakers, Small non-skid pads, Large non-skid pads, 01 speaker setup (htp-sb510), Chapter 1-4
Speaker Setup (HTP-SB510)
01
28
En
Chapter 1-4
Speaker Setup (HTP-SB510)
Safety precautions when
setting up
When assembling the speakers, lay them down
flat on their side to avoid accidents or injury.
Make sure to use a stable surface when
assembling, setting up, and placing the
speakers.
Home theater sound setup
The speaker should be installed below (in front
of) the TV. The height of the speaker stands can
be adjusted, or the speaker can be installed
without using the stands at all.
• The speaker and subwoofer are not
magnetically shielded and so should not be
used with CRT TV.
Preparing the speakers
1
Attach the non-skid pads to the base of
each speaker stands and the receiver
subwoofer.
For speaker stands:
Use the supplied adhesive to attach three
small pads to the base (bottom) of each
speaker stand.
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
Speaker
Subwoofer
Small non-skid pads
Large non-skid pads
HTP-710_VYXCN_En.book 28 ページ ２０１０年８月２３日 月曜日 午後６時４７分