Pioneer AXM-P90RS - Manual (Page 9)

Adjusting initial settings
1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Initial setting screen
Shows the function names and status.
1 Press SOURCE and hold until the unit
turns off.
# Pressing CD/DVD, TV or AUX/EXT can also
turn this unit off.
2 Press SHIFT to display the initial setting
display.
Clock adjustment menu, display setting menu,
general setting menu and menu lock can be
selected from this screen.
3 Press FUNC 1 to FUNC 5 to select the de-
sired setting.
FUNC 1: Press to switch to the clock adjust-
ment menu. (Setting the clock on this page)
FUNC 2: Press to switch to the display setting
menu. (Setting the display appearance on the
next page)
FUNC 3: Press to switch to the general setting
menu. (Configure the general settings on page
11)
FUNC 4: Press to turn the menu lock on or off.
(Setting the menu lock on page 11)
FUNC 5: Press to switch to the audio proces-
sor setting menu. (Setting the audio processor
on page 11)
4 Press BAND to exit the initial setting
display.
Setting the clock
Use these instructions to set the clock.
Switching to clock adjustment
screen
% Press FUNC 1 on the initial setting
screen.
Clock adjustment screen is displayed and the
clock can now be set.
Setting the clock
1 Move the thumb pad to select the seg-
ment of the clock display you wish to set.
Moving the thumb pad left or right will select
one segment of the clock display:
Hour
—Minute
2 Move the thumb pad to set the clock.
Moving the thumb pad up will increase the se-
lected hour or minute. Moving the thumb pad
down will decrease the selected hour or min-
ute.
Setting the clock by the time signal
% Press FUNC 2 on the clock adjustment
screen.
Pressing
FUNC 2 will reset the minutes seg-
ment.
If
00 to 29, the minutes are rounded down.
(e.g., 10:18 becomes 10:00.)
If 30 to 59, the minutes are rounded up. (e.g.,
10:36 becomes 11:00.)
Initial Settings
En
9
Section
04
Initial
Settings