Pioneer AXM-P90RS - Manual (Page 10)

Turning the off clock display on
or off
If the off clock display is turned on, the clock
appears on the display when the sources are
off.
% Press FUNC 1 on the clock adjustment
screen.
Pressing
FUNC 1 repeatedly will turn the clock
display on or off.
Returning to the initial setting
screen
% Press RETURN.
Pressing
RETURN takes you back to the initial
setting display.
Setting the display
appearance
Switching to display setting screen
% Press FUNC 2 on the initial setting
screen.
Display setting screen is displayed. Display
settings can now be set.
Adjusting the brightness
You can adjust the display brightness.
% Move the thumb pad to adjust the
brightness level.
Moving the thumb pad left or right increases
or decreases the brightness level.
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car
’s headlights are turned on. You
can turn the dimmer on or off.
% Press FUNC 1 on the display setting
screen.
Pressing
FUNC 1 repeatedly will turn the dim-
mer on or off.
Selecting the wallpaper pattern
You can select a display wallpaper.
% Press FUNC 2 on the display setting
screen.
Pressing
FUNC 2 repeatedly will switch the
display wallpaper.
Switching the reverse mode
If you do not perform an operation for about
30 seconds, screen indications start to reverse,
and continue reversing every 10 seconds.
% Press FUNC 3 on the display setting
screen.
Pressing
FUNC 3 repeatedly will turn the re-
verse mode on or off.
Returning to the initial setting
screen
% Press RETURN.
Pressing
RETURN takes you back to the initial
setting display.
Initial Settings
En
10
Section
04