Pioneer AXM-P90RS - Manual (Page 23)

Editing the auxiliary (AUX)
device name
The name displayed for the AUX1 Main,
AUX2 AUX, AUX3 Digital, AUX4 MiniPlug
and
AUX5 IP-BUS source can be edited.
! The animated source name displayed when
the source is selected cannot be changed.
1 Select an AUX source that you want to
edit a name for.
Press
SOURCE to select any of AUX1 Main,
AUX2 AUX, AUX3 Digital, AUX4 MiniPlug or
AUX5 IP-BUS.
# If the auxiliary setting is not turned on,
AUX1 Main, AUX2 AUX, AUX3 Digital,
AUX4 MiniPlug or AUX5 IP-BUS cannot be se-
lected. For more details, see Switching the auxili-
ary setting on page 11.
2 Click and hold the thumb pad to display
the function control screen.
3 Press and hold SHIFT on the function
control screen.
Name edit screen is displayed.
4 Press FUNC 1 or FUNC 2 to select the
character type.
FUNC 1: Alphabet, numbers and symbols
FUNC 2: Numbers and symbols
5 Move the thumb pad up or down to se-
lect a letter of the alphabet.
6 Move the thumb pad left or right to
move the cursor to the previous or next
character position.
7 If you have completed entering the
auxiliary (AUX) device name, press FUNC 5
to store in memory.
8 Press RETURN to switch to the function
control screen.
# Pressing FUNC 6 also switches to the function
control screen.
Available accessories
En
23
Section
05
A
vailable
accessories