Pioneer AXM-P90RS - Manual (Page 24)

Controlling the audio
processor
This unit can control Pioneer Audio Processor
(e.g. RS-A9, RS-P90 or DEQ-P90) as an audio
unit. For details about audio functions, please
refer to the combined audio unit
’s owner’s
manual. In this regard, some operations de-
scribed on these owner
’s manuals are differ-
ent from this unit
’s operation. This is caused
by the difference of remote control. Please see
the following chart and operate the audio unit.
Operations conversion chart
Audio unit This unit
a Move the thumb pad up
b Move the thumb pad down
c Move the thumb pad left
d Move the thumb pad right
Open the cover Click and hold the thumb pad
Close the cover Click and hold the thumb pad
Notes
! Audio unit adjustment requires technical
skills and knowledge of the automobile sound
system, acoustic field, amplifier characteris-
tics and speaker characteristics. If adjust-
ments are difficult or sound is unsatisfactory,
please contact an authorized Pioneer dealer.
! When adjustments have already been made at
your dealer, the optimum setup for the vehi-
cle
’s particular interior has been installed in
the memory. In this case, recall the corre-
sponding memory for use. For details, refer to
the audio unit
’s owner’s manual.
Differentia of the audio
function
Following functions are different from the
functions described in the audio processor
’s
operation manual.
! When using source level adjustment (SLA)
function, volume level for each source is
set as follows:
— Multi-CD player, CD and AUX3 are set to
the same volume adjustment automati-
cally.
— AUX2, AUX5, external unit 1 and exter-
nal unit 2 are set to the same volume ad-
justment automatically.
— Discrete volume adjustment can be set
to television, DVD, iPod, AUX1 and
AUX4.
! Up to four audio settings can be stored in
memory.
— When using this unit with RS-A9 or RS-
P90 :
two base memories, two custom mem-
ories and a last memory can be used.
— When using this unit with DEQ-P90:
four memories can be used.
! Audio setting of AUX1 Main can be stored
in the custom memory 1 independently.
! Memory protection can be used only for
the base memory.
— Memory protection can be used only
when RS-A9 or RS-P90 is used with this
unit. DEQ-P90 doesn
’t have this
function.
Audio unit control
En
24
Section
06