Pioneer DVR-540HX-S - Manual (Page 35)

Getting started 04
35
En
• Tune your external receiver to the
appropriate host channel and leave the
receiver on and the recorder in standby
overnight.
C If you use both an external receiver
and this recorder as sources, follow the
instructions above for setting up without
an external receiver. Only if this is
unsuccessful try the external receiver
method.
About EPG download
• EPG data can only be received when the
recorder is in standby. (When not using
the recorder, therefore, please switch it
into standby.) If you’re using an external
receiver, leave this on when EPG data is
downloading.
• If you cannot receive any of the host
channels (see the above table) then you
won’t be able to use the GUIDE Plus+
system. In this case do not set the postal
code (or set Country to
Other ) in the
GUIDE Plus+ setup screen. (When
GUIDE Plus+ service starts in your area,
set the postal code again.)
If digital broadcasts start in your area,
please set the
EPG Type Select setting in
the Initial Setup menu to Digital EPG .
• Even if you can’t use the EPG functions
where you live, you can still set VIDEO
Plus+ timer recordings and manual
recordings — see
Setting a timer
recording on page 66.
• The front panel display shows EPG when
receiving data. If you power on the
recorder during an EPG download, the
download is canceled.
• EPG data may be received several times
a day. All updates are automatic.
• When downloading EPG data, the
recorder may sound as though it is on.
This is normal.
Checking the downloaded data the
following day
1 Display the GUIDE Plus+ screen.
You should see a grid filled with channel
logos and TV listings information. Use the
/ buttons to review the list. If you notice
that there are channels missing, or that
there are channels in the list that you don’t
get, go to the Editor screen:
• Press repeatedly until the Menu bar is
highlighted.
• Press until Editor is highlighted. The
main area of the screen now shows a list
of channels. Those that are turned
ON
are displayed in the grid; those that are
OFF are hidden. Use the / / /
buttons to move down the list and turn
channels
ON or OFF as necessary.
• For any channel that you turn ON , the
GUIDE Plus+ system will need to know
how it is received (the source) and on
which program number. The source may
be the built-in tuner of this recorder, or
an external receiver. The program
GUIDE
DVR540HXS_WV_EN.book 35 ページ ２００６年３月３０日 木曜日 午後１２時３８分