Pioneer DVR-540HX-S - Manual (Page 124)

The Initial Setup menu 15
124
En
Analog Tuner
Auto Channel
Setting Auto Scan Select your country and then wait for the recorder to
auto tune into channels in your area. After auto scan
has finished, the channel mapping screen appears
showing which channels have been assigned to
which program numbers. You can skip unwanted
channels using the Manual CH Setting option below.
Press
HOME MENU to exit the channel mapping
screen.
Download from
TV If your TV supports this feature you can download all
the channels that your TV is tuned to via the SCART
input. Select your country and then wait for the
download to complete. After the download is com-
plete, the channel mapping screen appears, as
above.
See also the operating instructions that came with
your TV for more information.
Manual CH Setting Next Screen Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
/
buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the
Skip
setting to On .
• Set the CH SYSTEM setting to match the channel
system of your country or region.
• Set the
CHANNEL setting to the channel you want
to assign to the current channel preset.
• To manually fine tune the channel, change the
AFT
setting to Off then adjust the Level setting.
• Set the Sound System setting to match the sound
system of your region.
• The
Name field allows you to input a name of up to
five characters for the current channel preset.
• If the currently selected channel is scrambled
requiring a decoder connected to the
AV2 (INPUT 1/
DECODER) , set the Decoder setting to On .
Setting Options Explanation
DVR540HXS_WV_EN.book 124 ページ ２００６年３月３０日 木曜日 午後１２時３８分