Pioneer DVR-540HX-S - Manual (Page 118)

The Video Adjust menu 14
118
En
3 Select the setting you want to
adjust.
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive.
• PureCinema – This setting optimizes
the picture for film material when the
video output is set to progressive.
Usually this is best left set to
Auto ; try
switching to Off if the picture appears
unnatural.
• 3-D Y/C – Adjusts the brightness /
colour separation (NTSC video input
only).
• YNR – Adjusts the amount of noise
reduction (NR) applied to the Y
(brightness) component.
• CNR – Adjusts the amount of noise
reduction (NR) applied to the C (colour)
component.
• White AGC – Turn on for automatic
white level adjustment. 1
• White Level – Adjusts the intensity of
white.
• Black Level – Adjusts the intensity of
black.
• Black Setup – Corrects the standard
reference black level (NTSC video input
only).
• Hue – Adjusts overall balance between
red and green.
• Chroma Level – Adjusts how rich the
colours appear.
4 Adjust the currently selected
setting.
5 Press to exit.
You can now use the preset for any other
input or the built-in TV tuner.
Tip
• To see more of the picture as you adjust
different settings, press ENTER after
selecting the setting you want to adjust.
Note
1 When White AGC is On , the White Level setting can’t be adjusted.
ENTER
Memory1
3-D Y/C
Motion Still
PureCinma
Prog. Motion
Auto1
Motion Still
Pr 1
White Level
CNR
YNR
White AGC Off
Max
Off
Off
Max
Max Min
ENTER
HOME MENU
DVR540HXS_WV_EN.book 118 ページ ２００６年３月３０日 木曜日 午後１２時３８分