Pioneer DVR-540HX-S - Manual (Page 127)

The Initial Setup menu 15
127
En
Bilingual Recording A/L • Record the left (A) channel of a bilingual source
when recording to HDD with HDD Recording Format
set to Video Mode On, to DVD in Video mode or in
LPCM mode, from an external source.
B/R As above, but for right (B) channel recording.
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format
set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you
want on playback.
Audio Out
Digital Out On • Activates the digital audio output.
Off Deactivates the digital audio output.
When set to Off , all the following Audio Out settings are grayed out.
Dolby Digital Out Dolby Digital • Output a Dolby Digital signal when a Dolby Digital
source is being played.
Dolby Digital
PCM
Convert Dolby Digital sources to Linear PCM output.
Use if your connected equipment doesn’t have a
Dolby Digital decoder.
DTS Out On • Output a DTS signal when a DTS source is being
played.
Off Switch off the digital output when a DTS source is
being played. Use when your connected equipment
doesn’t have a DTS decoder. In this case, use the
analog audio outputs.
96 kHz PCM Out 96 kHz 48 kHz • Convert 96 kHz digital audio sources to 48 kHz out-
put. Use if your connected equipment doesn’t sup-
port 96 kHz sampling rate.
96 kHz Output 96 kHz digital audio when a 96 kHz source is
being played.
MPEG Out MPEG Output an MPEG audio signal when a source using
MPEG audio is being played.
MPEG PCM • Convert sources with MPEG audio to Linear PCM out-
put. Use if your connected equipment doesn’t have
an MPEG audio decoder.
Setting Options Explanation
DVR540HXS_WV_EN.book 127 ページ ２００６年３月３０日 木曜日 午後１２時３８分