Pioneer DVR-540HX-S - Manual (Page 126)

The Initial Setup menu 15
126
En
AV2/L1 In Video • Sets the AV2 (INPUT 1/DECODER) SCART input to
standard composite video.
S-Video Sets the AV2 (INPUT 1/DECODER) SCART input to
S-video.
RGB Sets the AV2 (INPUT 1/DECODER) SCART input to
RGB.
Decoder Use this setting if you connected a decoder to the
AV2 (INPUT 1/DECODER) SCART connector. For
scrambled channels, make sure that the channel
Decoder setting is set to On . (See Manual CH Setting
page 124.)
When the Input Line System is set to 525 System , RGB cannot be selected.
Even when set to RGB . depending on the connected device, the input signal may be composite video.
NTSC on PAL TV On • NTSC discs will play correctly on PAL-only TVs.
Off Use if your TV is already NTSC-compatible.
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 134 for related information.
Audio In
NICAM Select NICAM • Record the NICAM audio in a NICAM broadcast.
Regular Audio Record the non-NICAM audio in a NICAM broadcast.
(You can still switch the audio to record using the
AUDIO button before recording.)
Analog Tuner Level Normal • Standard setting.
Compression Use if the audio level from the built-in tuner is exces-
sive, causing distortion.
External Audio Stereo • Select if the audio from the currently selected exter-
nal input is standard stereo.
Bilingual Select if each channel carries a separate soundtrack.
Setting Options Explanation
DVR540HXS_WV_EN.book 126 ページ ２００６年３月３０日 木曜日 午後１２時３８分