Pioneer AVIC F900BT - Manual (Page 129)

Each touch of [ AV2 Input] changes the set-
tings as follows:
! Off — No video component is connected
! Video — External video component
p Use AV2 Input when connecting CD-RM10
(sold separately) through the external video
component.
Switching the auto aerial setting
If the blue lead of the navigation system is
connected to the aerial control terminal of the
vehicle, select either of the following settings.
! Radio — The aerial extends or turns on
only when the audio source is FM or AM.
The aerial is stored or turned off when the
AV source is switched to another source.
! Power — The aeriel extends or turns on
when the ignition switch is turned on. The
aeriel is stored or turned off when the igni-
tion switch is turned off.
% Touch [Ant CTRL] on the “AV Settings”
menu.
= For details, refer to Displaying the “AV Set-
tings
” menu on the previous page.
Touching [ Ant CTRL] switches between
[ Radio] and [Power].
p Regardless of whether [Radio] or [Power]
is selected, turning off the ignition switch
will cause the aeriel to automatically retract
or turn off.
Changing the wide screen mode
% Touch [Wide Mode] on the “AV Set-
tings
” menu.
= For details, refer to Displaying the “AV Set-
tings
” menu on the previous page.
Each touch of [ Wide Mode] changes the set-
tings as follows:
Full
— Normal
Full (full)
A 4:3 picture is enlarged in the horizontal di-
rection only, enabling you to enjoy a 4:3 TV pic-
ture (normal picture) without any omissions.
Normal (normal)
A 4:3 picture is displayed normally, giving you
no sense of disparity since its proportions are
the same as that of the normal picture.
p Different settings can be memorised for
each video source.
p The same setting is automatically applied
for the following grouping.
! SD, USB, iPod
! AV1 and AV2
p When video is viewed in a wide screen
mode that does not match its original as-
pect ratio, it may appear differently.
p Remember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author
’s
rights protected by the Copyright Law.
p The navigation map and the rear view cam-
era picture is always viewed at Full.
Switching the sound muting/
attenuation
You can select the muting method when the
navigation guidance is output. This setting is
also effective for a mute signal that has been
received from the MUTE lead connected to the
navigation system.
p When you use a mobile phone connected
with Bluetooth technology (dialling, talking,
incoming call), the AV source volume is al-
ways muted independently of this setting.
% Touch [MUTE Input/GUIDE] on the “AV
Settings
” menu.
= For details, refer to Displaying the “AV Set-
tings
” menu on the previous page.
Each touch of [ MUTE Input/GUIDE] changes
the settings as follows:
! MUTE — Muting
! ATT — Attenuation
! Normal — Volume does not change
p Operation returns to normal when the cor-
respond action is ended.
p When “SD” or “USB” selected as the AV
source, the AV sounds, the navigation gui-
dance and beep sounds are mixed and the
volume can be adjusted simultaneously.
Customising preferences
Engb
129
Chapter
21
Customising
pr
eferences