Brother DCP 8060 - Manual (Page 23)

1. Printing
17
Print Quality
1
Resolution
1
You can change the resolution as follows:
„ 1200 dpi
„ HQ1200
„ 600 dpi
„ 300 dpi
Note
If you use the high quality 1200 dpi setting, the print speed will be slower.
Toner Save Mode
1
You can conserve toner using this feature. When you set Toner Save Mode to On, print appears lighter. The
default setting is Off.
Note
We do not recommend Toner Save Mode for printing Photo or Greyscale images.
Print Setting
1
You can manually change the Print settings.
„ Auto
Selecting the Auto (Recommended) button will allow automatic printing with the most suitable print
settings for your print job.
„ Manual
You can change the settings manually by choosing Manual and clicking the Setting... button. You can set
brightness, contrast and other settings.