Brother DCP 8060 - Manual (Page 153)

9. ControlCenter2 (For Mac OS ® 10.2.4. or greater)
147
SCAN
9
There are four buttons for the Scan to Image, Scan to OCR, Scan to E-mail and Scan to File applications.
Note
You can configure your machine’s Scan key for each ControlCenter2 button in the Device Button tab.
Image
(example: Apple PreView)
9
The Scan to Image feature allows you to scan an image directly into your graphics application for image
editing. To change the default settings, click the button while holding down the Ctrl key and choose
Software Button.
If you want to scan and then crop a portion of a page after pre-scanning the document, check Show Scanner
Interface box.
If you want to scan a duplex document, check Duplex (two-sided) Scanning and choose Long-edge
binding or Short-edge binding. (Not available for MFC-8460N and DCP-8060)