Brother DCP 8060 - Manual (Page 112)

6. Brother PC-FAX Software (Not available for DCP models)
106
Configuring the Network PC-FAX Receiving Settings
6
If you wish to change the network PC-FAX Receive settings that you specified during the original MFL-Pro
Suite (see the Quick Setup Guide), follow the steps below.
a
In the PC-FAX RX Setup dialogue box, click the Network Settings button. The Network Settings
dialogue box appears.
b
You must specify the IP address or name of your machine.
Specify your machine by address
6
1 Enter the IP address of the machine in IP Address.
Specify your machine by name
6
1 Enter the machine node name in Node Name, or click the Browse button and choose the correct
Brother machine you want to use from the list.
Specify your PC name
6
1 You can specify the PC name that will appear on the display of the machine. To change the name,
enter the new name in Display Your PC Name.