Bfront wide / r l, Out 3 (hdzone) out 2 out 1 (control) selectable – Pioneer SC-LX78-S User Manual
Page 42
42
Connecting your equipment
03
Secondary MULTI-ZONE setup using speaker terminals (ZONE 3)
You must select 5.2 +ZONE 2+ZONE 3 in
% Connect a pair of speakers to the front wide speaker terminals.
R
Sub zone (ZONE 3)
Main zone
L
B
FRONT WIDE /
R
L
B
FRONT WIDE /
R
L
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
.
% Connect a separate receiver to this receiver’s HDMI OUT 3 terminal.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
OUT 3
(HDZONE)
OUT 2
OUT 1
(CONTROL)
SELECTABLE
OUT 3
(HDZONE)
OUT 2
OUT 1
(CONTROL)
SELECTABLE
HDMI IN
Sub zone (HDZONE)
Main zone
Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function (
).
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
on
.
! You must select HDZONE in
) to use this setup.
1 Connect the speaker to the front wide speaker terminal or surround back speaker terminal.
Which speaker terminal is connected defers depending on the Speaker System (
) setting. For details,
see
Installing your speaker system
on
.
The following figure shows the connection of the surround back speaker terminal.
2 Connect a TV monitor to the HDMI OUT 3 (HDZONE) terminal on this receiver.
(Single)
A
SURROUND BACK
R
L
OUT 3
(HDZONE)
OUT 2
OUT 1
(CONTROL)
SELECTABLE
R
Sub zone (HDZONE)
Main zone
L
(Single)
A
SURROUND BACK
R
L
OUT 3
(HDZONE)
OUT 2
OUT 1
(CONTROL)
SELECTABLE
HDMI IN
2
1