beautypg.com

Connecting your tv and playback components, About hdmi – Pioneer SC-LX78-S User Manual

Page 33

background image

33

Connecting your equipment

03

About HDMI

The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio.
This receiver incorporates High-Definition Multimedia Interface (HDMI

®

/

TM

) technology.

This receiver supports the functions described below through HDMI connections.
! Digital transfer of uncompressed video (contents protected by HDCP (1080p/24, 1080p/60, etc.))
! 3D signal transfer
! Deep Color signal transfer
! x.v.Color signal transfer
! ARC (Audio Return Channel)
! 4K signal transfer

— This may not operate properly, depending on the connected equipment.
— 4K 24p, 4K 25p, 4K 30p, 4K 50p and 4K 60p signals are supported.

! Input of multi-channel linear PCM digital audio signals (192 kHz or less) for up to 8 channels
! Input of the following digital audio formats:

— Dolby Digital, Dolby Digital Plus, DTS, High bitrate audio (Dolby TrueHD, DTS-HD Master Audio, DTS-HD

High Resolution Audio), CD, SACD (DSD signal), OBJECT based audio (Atmos)

! Synchronized operation with components using the Control with HDMI function (see

Control with HDMI func-

tion

on

page 74

)

Notes

! An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High

Bandwidth Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a
separate adaptor (DVI

dHDMI) to do so. A DVI connection, however, does not support audio signals. Consult

your local audio dealer for more information.

! If you connect a component that is not compatible with HDCP, an HDCP ERROR message is displayed on

the front panel display. Some components that are compatible with HDCP still cause this message to be dis-
played, but so long as there is no problem with displaying video this is not a malfunction.

! Depending on the component you have connected, using a DVI connection may result in unreliable signal

transfers.

! This receiver supports SACD, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To take advantage

of these formats, however, make sure that the component connected to this receiver also supports the corre-
sponding format.

! Use a High Speed HDMI

®

/

TM

Cable. If an HDMI cable other than a High Speed HDMI

®

/

TM

Cable is used, it may

not work properly.

! When an HDMI cable with a built-in equalizer is connected, it may not operate properly.
! Signal transfer is only possible when connected to a compatible component.
! HDMI format digital audio transmissions require a longer time to be recognized. Due to this, interruption in the

audio may occur when switching between audio formats or beginning playback.

! Turning on/off the device connected to this unit’s HDMI OUT terminal during playback, or disconnecting/con-

necting the HDMI cable during playback, may cause noise or interrupted audio.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and other countries.

“x.v.Color” and

are trademarks of Sony Corporation.

Connecting your TV and playback components

Connecting using HDMI

If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you can connect it
to this receiver using a commercially available HDMI cable.
If the TV and playback components support the Control with HDMI feature, the convenient Control with HDMI
functions can be used (see

Control with HDMI function

on

page 74

).

LAN (10/100) DC OUTPUT

for WIRELESS LAN

(OUTPUT 5 V

0.6 A MAX)

(OUTPUT 5 V

0.9 A MAX)

OPTICAL

COAXIAL ASSIGNABLE

ASSIGNABLE

IN

1

(CD)

IN

1

(DVD)

BD IN

IN

2

(SAT/CBL)

IN

3

(DVR/BDR)

IN

6

IN

4

IN

7

MHL

IN

1

(TV)

IN

2

(DVR/BDR)

IN

1

(DVD)

IN

2

(SAT/CBL)

OUT

OUT 3

(HDZONE)

OUT 2

OUT 1

(CONTROL)

SELECTABLE

HDMI

ASSIGNABLE

1

-

7

ASSIGN-

ABLE

IN

1

(CD)

ASSIGN-

ABLE

LAN

(10/100) DC OUTPUT

for WIRELESS LAN

(OUTPUT 5 V

0.6 A MAX)

(OUTPUT 5 V

0.9 A MAX)

OPTICAL

COAXIAL

ASSIGNABLE

ASSIGNABLE

IN

1

(DVD)

BD IN

IN

2

(SAT/CBL)

IN

3

(DVR/BDR)

IN

6

IN

4

IN

7

MHL

IN

1

(TV)

IN

2

(DVR/BDR)

IN

1

(DVD)

IN

2

(SAT/CBL)

OUT

OUT 3

(HDZONE)

OUT 2

OUT 1

(CONTROL)

SELECTABLE

HDMI

ASSIGNABLE

1

-

7

DIGITAL OUT

COAXIAL OPTICAL

ANALOG

R

L

AUDIO OUT

HDMI IN

HDMI OUT

HDMI OUT

HDMI/DVI-compatible
Blu-ray Disc player

Other HDMI/DVI-
equipped component

HDMI/DVI-compatible

monitor

Select one

This connection is required in
order to listen to the sound of
the TV over the receiver.

 
 

 

 

This manual is related to the following products: