Network setup menu – Pioneer SC-LX78-S User Manual
Page 106
106
The System Setup and Other Setup menus
12
Network Setup menu
Make the settings for connecting the receiver to the Internet and using the network functions.
1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and
then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use
i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
2 Select ‘System Setup’ from the HOME MENU.
3 Select ‘Network Setup’ from the System Setup menu.
4 Select the setting you want to adjust.
If you are doing this for the first time, you may want to adjust these settings in order:
! IP Address, Proxy – Sets up the IP address/Proxy of this receiver (
).
! Network Standby – Even when the unit is in standby mode, it is possible to turn on the power of the unit
from iControlAV5 (
! Friendly Name – The name of the receiver displayed on a computer or other device connected to the network
can be changed (
).
! Parental Lock – Restricts usage of network functions (
! Port Number Setting – Sets the numbers of the ports where signals from IP Control are received (
).
IP address/Proxy setting
In case the router connected to the LAN terminal on this receiver is a broadband router (with a built-in DHCP server
function), simply turn on the DHCP server function, and you will not need to set up the network manually. You must
set up the network as described below only when you have connected this receiver to a broadband router without a
DHCP server function. Before you set up the network, consult with your ISP or the network manager for the required
settings. It is advised that you also refer to the operation manual supplied with your network component.
! In case you make changes to the network configuration without the DHCP server function, make the corre-
sponding changes to the network settings of this receiver.
IP Address
The IP address to be entered must be defined within the following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files stored on components on the network or listen to Internet radio
stations.
Class A: 10.0.0.1 to 10.255.255.254
Class B: 172.16.0.1 to 172.31.255.254
Class C: 192.168.0.1 to 192.168.255.254
Subnet Mask
In case an xDSL modem or a terminal adapter is directly connected to this receiver, enter the subnet mask pro-
vided by your ISP on paper. In most cases, enter 255.255.255.0.
Default Gateway
In case a gateway (router) is connected to this receiver, enter the corresponding IP address.
Primary DNS Server/Secondary DNS Server
In case there is only one DNS server address provided by your ISP on paper, enter it in the ‘Primary DNS Server’
field. In case there are more than two DNS server addresses, enter ‘Secondary DNS Server’ in the other DNS
server address field.
Proxy Hostname/Proxy Port
This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address
of your proxy server in the ‘Proxy Hostname’ field. Also, enter the port number of your proxy server in the
‘Proxy Port’ field.
1 Select ‘IP Address, Proxy’ from the Network Setup menu.
2 Select the DHCP setting you want.
When you select ON, the network is automatically set up, and you do not need to follow Steps 3. Proceed with
Step 4.
If there is no DHCP server on the network and you select ON, this receiver will use its own Auto IP function to
determine the IP address.
! The IP address determined by the Auto IP function is 169.254.X.X. You cannot listen to an Internet radio sta-
tion if the IP address is set for the Auto IP function.
3 Enter the IP Address, Subnet Mask, Default Gateway, Primary DNS Server and
Secondary DNS Server.
Press
i/j to select a number and k/l to move the cursor.
4 Select ‘OFF’ or ‘ON’ for the Enable Proxy Server setting to deactivate or activate the proxy
server.
In case you select ‘OFF’, proceed with Step 7. In case you select ‘ON’, on the other hand, proceed with Step 5.
5 Enter the address of your proxy server or the domain name.
Use
i/j to select a character, k/l to set the position, and ENTER to confirm your selection.
6 Enter the port number of your proxy server.
Use
i/j to select a character, k/l to set the position, and ENTER to confirm your selection.
7 Select ‘OK’ to confirm the IP Address/Proxy setup.
Network Standby
Set so that the iControlAV5 function connected to the same LAN with the receiver can be used even while the unit
is in standby status.
1 Select ‘Network Standby’ from the Network Setup menu.
2 Specify whether the Network Standby is ON or OFF.
! ON – Even when the unit is in standby mode, it is possible to turn on the power of the unit from the device
iControlAV5 that is connected to the network.
! OFF – The iControlAV5 function is not available while the receiver is in standby mode (power consumption
during standby can be suppressed).
Friendly Name
1 Select ‘Friendly Name’ from the Network Setup menu.
2 Select ‘Edit Name’ then select ‘Rename’.
If after changing the name you want to restore the name to the default, select Default.
3 Input the name you want.
Use
i/j to select a character, k/l to set the position, and ENTER to confirm your selection.