Olympus E-410 - Manual (Page 61)

EN
61
Playback functi
ons
4
Copying selected frames
1
Display the images you want to copy and press
the
i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the
i button again.
2
Press p to display the next images you want to
copy and press the i button.
3
After you have selected the images to copy,
press the
COPY / < (copy) button.
4
Use ac to select [YES], then press i.
• It is possible to copy selected frames during index display.
Single-frame copy
1
Select the desired frame and press the COPY / < (copy) button.
2
Use ac to select [YES], then press i.
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect
and press the
0 (protect) button.
• 9 (protect mark) is displayed on the top
right corner of the screen.
To cancel the protection
Display the images that are protected and
press the 0 button.
Protecting images – Preventing accidental erasure
COPY / < button
0 button
i button