Olympus E-410 - Manual (Page 42)

42
EN
Shooti
ng functions – V
ar
ious shooting functi
ons / Focusing functio
ns
3
2
Use p to specify the direction for joining, then shoot
the subject with the edges overlapping.
d: Joins the next image to the right.
b: Joins the next image to the left.
a: Joins the next image to the top.
c: Joins the next image to the bottom.
• Shoot while changing the composition such that the subject
overlaps.
• The focus, exposure, etc. will be determined in the first image.
• The
g (warning) mark will be displayed after you have finished taking 10 shots.
• Pressing the i button before shooting the first frame returns to the scene mode selection
menu.
• Pressing the i button in the midst of shooting ends the sequence of panorama shooting, and
allows you to continue with the next one.
Normally, the camera measures the distance to the subject using the 3 AF frames in the
viewfinder and selects the most appropriate point. This function allows you to select only one
AF frame.
[AUTO] or P (Auto)
Focuses using the 3 AF frames.
Q Focuses using the left AF frame.
R Focuses using the center AF frame.
S Focuses using the right AF frame.
i p: AF AREAi
MENU[X]P
x Notes
• Panorama shooting cannot be done if the OLYMPUS xD-Picture Card is not loaded in the
camera.
• During panorama shooting, the image previously taken for position alignment will not be
retained. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
AF frame selection
Control panel screen
Menu
Viewfinder
Center AF frame
Left AF frame Right AF frame
i button MENU button