Olympus E-410 User Manual

Page 52

Shooti

ng functions – Exposure, image and color

TIPS
After pressing the shutter button, [WB NG RETRY] is displayed:

J When there is not enough white in the image, or when the image is too bright, too dark or the

colors look unnatural, you cannot register the white balance. Change the aperture and shutter
speed settings, then repeat the procedure from Step 1.

You can select image tone to create unique image effects. You can also fine-adjust image

parameters such as contrast and sharpness for each mode.
MENU[W][PICTURE MODE]

The adjustable parameters are classified according to the

condition of the picture.

• Contrast / Sharpness / Saturation

[

hVIVID]

: Produces vivid colors.

[

iNATURAL]

: Produces natural colors.

[

jMUTED]

: Produces flat tones.

• Contrast / Sharpness / B&W Filter / Pict. tone

[MONOTONE]

: Produces black and white tone.

The individual parameters are as follows.

[CONTRAST]

: Distinction between light and dark

[SHARPNESS] : Sharpness of the image
[SATURATION] : Vividness of the color
[B&W FILTER] : Creates a black and white image. The

filter color is brightened and the
complementary color is darkened.

[N: NEUTRAL] : Creates a normal black and white

image.

[Ye: YELLOW] : Reproduces clearly defined white

cloud with natural blue sky.

[Or: ORANGE] : Slightly emphasizes colors in blue

skies and sunsets.

[R: RED]

: Strongly emphasizes colors in blue

skies and brightness of crimson
foliage.

[G: GREEN]

: Strongly emphasizes colors in red

lips and green leaves.

[PICT. TONE]

: Colors the black and white image.

[N: NEUTRAL] : Creates a normal black and white image.
[S: SEPIA]

: Sepia

[B: BLUE]

: Bluish

[P: PURPLE] : Purplish
[G: GREEN]

: Greenish

Picture mode

The adjusted parameters are recorded in each picture effect mode. You can select the picture effect
modes on the control panel.

CUSTOM RESET

SETTING

CONTRAST