Olympus E-410 - Manual (Page 121)

EN
121
O
ther
s
11
• Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode
failure or damage to the monitor.
• A strip of light may appear on the top / bottom of the monitor, but this is not a malfunction.
• When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This
is not a malfunction; it will be less noticeable in playback mode.
• In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may
change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place
it in a warm place. An LCD monitor exhibiting poor performance due to low temperatures will recover in
normal temperatures.
• The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots
of light may appear constantly on the LCD Monitor. Due to its characteristics or the angle at which you are
viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.
• Do not immerse in water or splash with water.
• Do not drop or exert strong force on the lens.
• Do not hold at the moving part of the lens.
• Do not touch the lens surface directly.
• Do not touch the contact points directly.
• Do not subject to abrupt temperature changes.
• Do observe the operating temperature limit.
• Olympus makes no representations or warranties regarding any damages, or benefit expected by using this
unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product.
• Olympus makes no representations or warranties regarding any damages or any benefit expected by using
this unit lawfully which are caused by erasing picture data.
• Olympus makes no representations or warranties, either expressed or implied, by or concerning any content
of these written materials or software, and in no event shall be liable for any implied warranty of
merchantability or fitness for any particular purpose or for any consequential, incidental or indirect damages
(including but not limited to damages for loss of business profits, business interruption and loss of business
information) arising from the use or inability to use these written materials or software or equipment. Some
countries do not allow the exclusion or limitation of liability for consequential or incidental damages, so the
above limitations may not apply to you.
• Olympus reserves all rights to this manual.
Unauthorized photographing or use of copyrighted material may violate applicable copyright laws.
Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe
upon the rights of copyright owners.
LCD Monitor
Lens
Legal and Other Notices
Disclaimer of Warranty
Warning