Olympus E-410 - Manual (Page 114)

114
EN
10 Interchangeable lenses
Usable lenses
Select the lens that you want to shoot with.
Use a specified Four Thirds lens (Four Thirds mount). When a non-specified lens is used, AF
(auto focus) and light metering will not function correctly. In some cases, other functions may
not work either.
Four Thirds mount
Developed by Olympus as the lens mount standard for the Four Thirds system. These all-new
interchangeable lenses featuring the Four Thirds mount were developed from the ground up based on
optic engineering exclusively for digital cameras.
ZUIKO DIGITAL interchangeable lens
Four Thirds system interchangeable lens designed to withstand rigorous professional use. The
Four Thirds system makes it possible for a fast lens to be compact and lightweight as well.
„ Names of parts
1
Hood mount section
2 Filter mount thread
3 Zoom ring
4 Focus ring
5 Mount index
6 Electrical contacts
7 Front cap
8 Rear cap
9 Lens hood
Lens
x Notes
• When you attach or remove the body cap and lens from the camera, keep the lens mount on
the camera pointed downward. This helps prevent dust and other foreign matter from getting
inside the camera.
• Do not remove the body cap or attach the lens in dusty places.
• Do not point the lens attached to the camera toward the sun. This may cause the camera to
malfunction or even ignite due to the magnifying effect of sunlight focusing through the lens.
• Be careful not to lose the body cap and rear cap.
• Attach the body cap to the camera to prevent dust from getting inside when no lens is
attached.
ZUIKO DIGITAL interchangeable lens
„ Attaching the hood „ Storing the hood
Interchangeable l
enses
10
• Use the hood when shooting a
backlit subject.
• For 17.5-45 mm lens, the lens
hood is not provided.