Olympus E-500 - Manual (Page 21)

21
Control panel screen and function settings
1
Basic operat
ion
s
Setting using direct buttons
1
Press the button for the function you want to set (direct button).
• The direct menu is displayed.
Ex.) When setting white balance
2
Use the control dial to set.
• If you do not operate the control dial within a few seconds ("Button timer" g
P. 136), the control panel screen will be restored and your setting will be
confirmed. Your setting can also be confirmed by pressing the
i button.
List of direct buttons
Direct buttons Function Ref. Page
1 WB (White balance) button Sets white balance P. 85
2 AF (Focus mode) button Sets focus mode P. 70
3 ISO button Sets ISO sensitivity P. 82
4
(AF frame selection) button Selects AF frame P. 69
5 (Metering) button Sets metering mode P. 77
6
Y/j (Remote control/
Selftimer/Drive) button
Sets Remote control /
Selftimer / Drive P. 62, P. 63
P. 65
7
F (Exposure compensation)
button Sets exposure
compensation value
P. 79
8 # (Flash) switch Sets flash mode P. 53
Direct menu
2
1