Compensating all wb, Manual flash, Compensating all wb manual flash – Olympus E-500 User Manual
Page 125: G p. 125)
125
8
C
u
st
omi
z
in
g th
e set
ting
s/fu
nct
ion
s of
you
r c
a
mera
Compensating all WB
This lets you apply the same compensation value to all the white balance
modes at once.
1
Menu
[
]
[ALL >]
2
Use
to set.
[ALL SET]
The same compensation value
applies to all WB modes.
[ALL RESET] The WB compensation value
settings applied to each WB
mode are all cleared at once.
3
Press the
i button.
4
Do the following steps depending on the setting you want.
If you select [ALL SET]
1) Use
bd to select the color direction.
R-B
Red-Blue
G-M
Green-Magenta
2) Use
ac to set compensate value.
• You can check the white balance you have adjusted.
If you select [ALL RESET]
1) Use
ac to select [YES].
5
Press the
i button.
This allows the built-in flash to output a fixed amount of light. With [MANUAL
FLASH] set to [ON], you can set the amount of light (FULL, 1/4, 1/16, or 1/64)
in the flash mode setting.
1
Menu
[
]
[MANUAL FLASH]
2
Use
to select [ON] or [OFF].
3
Press the
i button.
Manual flash