Olympus DS-3000 - Manual (Page 54)

54
Upload Files
Uploads the DSS files that are currently selected in the Dictation ListView to the device detected in
the device window. If multiple devices are detected in the Device TreeView, a dialog box appears
for you to select which devices to upload the DSS files
to . WMA files can be uploaded in the same
way as DSS files when the DS-10 is connected.
Transfer The Date/Time
Transfers the date/time data of the PC to the recorder.
Create & Send Job Data
Use this to create and transfer "Author ID", "Work Type ID", and "DS-3000 Priority Level" to your
recorder.
[Author ID]
It is possible to create and send up to 10 different Author IDs to the DS-3000. Here, the following
characters can be used.
Number '0' – '9'
Alphabet 'A' – 'Z'
Underscore '_'
Capital letters must also be used. If you use small letters, they will be converted to capital letters.
If you press the [Save] button, the IDs will be registered in your registry without being transmitted
to the DS-3000. If you press the [Send] button, the IDs will be transmitted to the DS-3000.
[Work Type ID]
It is possible to create and send up 10 different Work Type IDs to the DS-3000.
If you press the [Save] button, the IDs will be registered in your registry without being transmitted
to the DS-3000. If you press the [Send] button, the IDs will be transmitted to the DS-3000.
[DS-3000 Priority Level]
You can assign a device priority level of 0 to 15 for each DS-3000. The default priority level is 7
and the highest level is 15. Once the priority level is changed and transferred to the DS-3000, the
level will be maintained until a new priority level is transferred. Please note that the device priority
level can be changed only through the software.