Olympus D-230 - Manual (Page 75)

74
O
THER
FUNCTIONS
REC VIEW
After each picture is taken, the image is displayed on the LCD monitor for a
few seconds for you to view.
1
Open the lens barrier.
The camera turns on in the Record
mode.
2
Press the button.
The monitor shows the Camera
menu.
3
Select [SETUP] using the /
buttons and press the
button.
4
Select [REC VIEW] using the
/ buttons and press
the button.
5
Select [ON] using the /
buttons and press the
button.
ON: The monitor briefly shows the
last image you took once
shooting is completed.
OFF: The camera is ready to take the
next picture immediately after
shooting is completed.
The Rec view setting is now completed.
Press the button again to exit the menu.
Note The Rec view mode remains when the lens barrier is closed.