Olympus D-230 User Manual

Page 38

RECORDING

FUNCTIONS

Adjust the exposure

compensation setting using

the

buttons and

press the

button.

Press

[–] to darken image or

[+] to brighten image.

The exposure compensation setting

is now completed.

Press the

button again to exit the

menu.

Take a picture.

Note

• The setting of exposure compensation returns to ±0.0 (default

setting) when the clear settings value is [RESET] and the lens
barrier is closed. See “Clear settings” (

p.75).

• When the exposure is corrected, the brightness of the image

displayed on the monitor also changes. However, the variation
may be less noticeable when the subject is dark. In this case,
check the recorded image to confirm that exposure is
satisfactory.

Caution

• If the flash is used, the image brightness (exposure) may

differ from the intended brightness (exposure).

• The exposure compensation can not correct the image

brightness if the surroundings of the subject are extremely
bright or dark.

EXPOSURE COMPENSATION