Barco R9003110 - Manual (Page 77)

10. Settings
Image 10-14
10.5 User Control
What can be done ?
The User control parameter allows to lock the RCU, the commands coming from the RCU (or the executive RCU) are then ignored
in the projector.
This can be used to prevent unauthorized adjustment of projector parameters.
How to lock the RCU ?
1. Press MENU to activate the Toolbar
2. Press → to select the Settings item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select User Control (image 10-15)
5. Press → to pull down the menu
6. Use ↑ or ↓ to select ON or OFF
7. Press ENTER
Image 10-15
How to unlock the RCU once locked ?
Following password has to be entered on the RCU or on the executive RCU:
1. Enter the “More...” password (password used to access advanced menu)
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 73