Barco R9003110 - Manual (Page 61)

8. Adjustments
Image 8-14
8.11 Standby Timer
Purpose of the Standby Timer
If there is no signal, and the standby timer is enabled, a dialogbox is displayed and the projector will shut down after a determined
time.
Image 8-15
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press MENU to activate the Toolbar
2. Press → to select Adjustment
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Standby Timer (image 8-16)
5. Press ENTER to activate the function
On the screen appears a dialogbox (image 8-17)
6. Use ↑ or ↓ to select Enabled, a box surrounds the selected item, press ENTER to activate
7. Use ↑ or ↓ to browse to the input field
8. Use ←or→ , the numeric keys on the remote or the keypad to change the countdown setting
9. Press MENU or BACK to exit or to go back to the previous menu
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 57