Barco R9003110 - Manual (Page 39)

5. Getting started
Image 5-14
Specifications of the RC input
U
in
= 9V
I
max
= 80 mA
Internal IR receivers can be disabled:
• mono jack : on plug in of the jack
• stereo jack : on plug in or using an external switch bringing the right channel (B) to ground level.
A B C
D
Image 5-15
Stereo jack pin configuration
A tip: Left channel
B ring: right channel
C screen: common (GND)
D external switch
The Remote connection uses a standard two wire cable terminated on each end with a 3.5 mm male
(mono/stereo) phone jack.
This cable is not delivered but is available in most electronical or audio shops.
5.7 Projector address
Overview
• Address setting
• Displaying and Programming addresses into the RCU
5.7.1 Address setting
Projector address
Address installed in the projector to be individually controlled.
Common address
Default address. Projector will always execute the command coming from a RCU programmed with that common
address.
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 35