AEG Voxtel R100 - Manual (Page 7)

7
UK
5 AUXILIARY FEATURES
5.1 Power saving
Your PMR unit has special circuitry designed to extend the life of your battery. When the
unit is not used for 4 seconds, it will automatically switch into a low power mode. The power
saving feature does not affect the PMR ability to receive transmissions. When a signal is
detected, it automatically returns to full power mode.
5.2 Low battery meter indicator
The PMR can detect the low battery level when battery voltage goes low. The battery icon
will display the low battery status as follows. When battery voltage at low battery level. The
empty battery symbol will appear at this stage and continue to blink. The battery icon will
continue to blink until it totally drain the battery voltage .
Note:
To have good communication, once the battery reach in low battery level, replace the
batteries into new ones.
6 SAFETY
!
Damaged antenna
Do not use any PMR that has a damaged antenna. If a damaged antenna comes in
contact with the skin, a minor burn may result.
!
Batteries
All batteries can cause property damage and/or bodily injury such as burns if
conductive material such as jewelry, keys, or beaded chains touches exposed
terminals. The material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.
!
Warning for vehicles with an air bag
Do not place your unit in the area over an air bag or in the air bag deployment
area. Air bags inflate with great force. If a unit is placed in the air bag deployment
area and the air bag inflates, the device may be propelled with great force and
cause serious injury to the occupants of the vehicle.
!
Potentially explosive atmospheres
Turn your unit off when in any area with a potentially explosive atmosphere, unless
it is a type especially qualified for such use (for example, factory mutual approved).
Sparks in such areas could cause an explosion or fire resulting in injury or even
death.
!
Batteries
Do not replace or charge batteries in a potentially explosive atmosphere. Contact
sparking may occur while installing or removing batteries and cause an explosion.