AEG Voxtel R100 - Manual (Page 6)

6
4.6 Changing channels
The PMR has 8 available channels. To change channels, in normal mode:
tPress the menu button
.
>The channel icon “1 ” on the LCD screen will start blinking.
tWhile the channel icon is blinking, press or to select the desired channel.
>The channel changes from 1 to 8, or vice versa.
tPress the menu button to confirm your setting and return to the standby mode.
4.7 Calling (paging) tone
You can use the call button to send a tone to other users on the same channel. To
activate this feature:
tWith the PMR in normal mode, press and release the call button .
>The unit will transmit a 2-second page tone to the other unit(s) set with the same
channel within transmitting range.
4.8 Channel scan
Your radio can scan the 8 channels to any activity. This allows to find other radios without
having to change the channel.
To activate this feature:
tPress and hold the menu
and up button at the same time and channel scanning
will start immediately, with displayed on the screen and the channel number cycling
through the channels.
>When a signal is detected, the unit will pause on that channel, while receiving the signal
and for a further 3 seconds.
tPress the PTT button to stop scanning and talk on that channel or press or to
manually start the scanning.
tTo stop scanning, press the menu button and return to standby mode.
4.9 Monitor feature
You can use the monitor feature to check for weaker signals in the current channel.
To activate this feature:
tPress and hold the menu
and down button at the same time.
>The receiving icons appears on the display
>Your handset will pick up any signals on the current channel.
tPress the menu button to stop the monitoring.
4.10 To lock/unock the buttons
With the buttons lock you can still transmit , or call the current channel, but you cannot
change the volume. To activate this feature:
tIn the standby mode, press and hold the menu button
until the icon appears on
the LCD screen.
To unlock:
tPress and hold menu button
again until the icon disappears on the LCD screen.