Xerox WorkCentre XK50cx-9578 - Manual (Page 72)

6.8
U s e r G u i d e
M A I N T A I N I N G I N K C A R T R I D G E S
Remove the old cartridge(s) by pulling
the top toward you until there is a click.
Remove the cartridge(s) from the Carrier.
Carefully unwrap the new Ink
Cartridge(s) and remove the sealing tape.
Slowly pull straight out on the tab located
at the end of the Ink Cartridge.
Slide the new Ink Cartridge down into the
holder and push it forward until it clicks
into place.
Lower the Scanner Module support arm
and Module to the closed position.
CARTRIDGE CHANGED? appears in the
display.
Press Select
1 3
4
5 Electrical Contacts
Note: Avoid touching the electrical
contacts on the cartridge.
Ensure that there are no pieces of tape
remaining on the cartridge.
6
7