Xerox WorkCentre XK50cx-9578 - Manual (Page 51)

3.5
U s e r G u i d e
S E T T I N G R E S O L U T I O N A N D C O N T R A S T
3
Setting Resolution and Contrast
When sending typical text based
documents,the default resolution and
contrast settings produce good results.
However, if you send documents that are
of poor quality, or contain photographs,
you can adjust the resolution and
contrast to ensure a higher quality.
Resolution
Press Quality to increase sharpness
and clarity. The document types
recommended for quality settings are
described in the table on this page.
Note: Best Resolution mode is not available
if the Send From Memory feature is set to
ON. If Send From Memory is set to ON, all
documents will be stored to memory in
Normal mode.
If the XK50cx is set to Best Resolution mode
and the remote fax machine does not
support Best Resolution, the XK50cx will
transmit using the highest resolution mode
supported by the remote fax machine.
M o d e R e c o m m e n d e d f o r :
Draft Documents with normal
sized characters.
Normal Documents containing
small characters or thin
lines, or for sending
documents printed using
a dot-matrix printer.
Best Documents containing
extremely fine detail.
Photo mode scanning and
Best modes are enabled
only if the remote
machine also supports
Best resolution. (See the
Note below)