Xerox WorkCentre M35-4011 - Manual (Page 45)

Configuring Printer Drivers 1-29
4 Click Bi-Directional Setup.... The Bi-Directional Communication dialog opens.
5 Enter the Device Name or TCP/IP address.
6 Select Enable Bi-Directional Communication.
7 Click OK. Bi-Directional communication is enabled. A Status button appears on
the Paper/Output tab of the printer driver. By clicking the Status button, you can
access current information about the printer. See Bi-Directional Printer Drivers
on page 1-30.
Figure 1-13: Bi-Directional Communication Dialog
N OTE : Click the SNMP Community Name button to display the SNMP
Community Name dialog and the server or client’s default SNMP
Community Name. If the name is not available, “Public” will appear. If
neither item appears, you can enter the information.
If the SNMP Community Name is unknown, Bi-Directional communication
will not be available for the drivers.