Xerox WorkCentre 7425-7428-7435 avec built-in controller-12224 - Manual (Page 5)

3
6. Clear All
If pressed once, resets the default settings and displays the first screen
for the current selection. If pressed twice, resets all the features to their
default settings.
7. Interrupt
Temporarily stops the current copy job to allow a priority job to be run.
8. Stop
Temporarily stops the current job. Follow the touch screen message to
cancel or resume your job.
9. Start
Starts the job.
10. Alphanumeric Keypad
11. C
Deletes numeric values or the last digit entered.
12. Dial Pause
Enters a pause in a telephone number when transmitting a fax.
13. Machine Status Button
Displays the current status of the printer on the touch screen.
14. Job Status Button
Displays job progress information on the touch screen.