Xerox Stampante digitale a colori Xerox 700i-700 con Xerox EX Print Server powered by Fiery-15952 - Manual (Page 6)

Page 6
Virtual Printers
The FreeFlow enablement supports Fiery Virtual Printers, which allow you to print to the
EX Print Server using predefined settings saved as a special print queue. The Fiery
administrator can create virtual printers and publish them so that users can access them on the
network. For information about using virtual printers, see Command WorkStation Additional
Information in Utilities, which is part of the user documentation set.
N OTE : After you create a new Fiery Virtual Printer, you must restart the EX Print Server to
register the new virtual printer with FreeFlow Print Path.
Tab printing
Tab printing
Tab printing is supported for both full-cut and precut tabs. Precut tabs are supported for both
Page Inserts and Exception Pages. When used for Page Inserts, they map to the Fiery Insert
Tab feature found under Mixed Media. When used for Exception Pages, they map to the Fiery
Page Range feature found under Mixed Media.
For information about using Mixed Media, see Command WorkStation Additional
Information in Utilities, which is part of the user documentation set.
Printing RDO files that contain precut tabs
The EX Print Server supports precut tabs in FreeFlow applications such as Makeready. To
ensure that the text prints on tabs, send the job directly to the EX Print Server without
previewing it in Command WorkStation or changing the settings in Job Properties.
If the print job is sent as an RDO (raster document object) file, or processed through Xerox
PostScript conversion, the size is not predefined, but the job prints correctly.
N OTE : Tabs must be programmed as 9 x 11-inch precut tabs, not 8.5 x 11-inch.